Floor-raising equipment suitable for breeder chickens
1. Improve the health level of chickens: Raising laying hens in flat conditions allows the chickens to move freely, exercise their muscles,
enhance their immunity, and reduce the incidence of diseases.
2. Improve egg quality: Raising laying hens in flat conditions can improve egg quality, making the yolk color brighter and the protein quality better.
3. Improve breeding efficiency: Flat-laying chicken farming can reduce equipment investment, improve feed utilization, and thus reduce breeding costs.
How the material line can be used
01 Flat-laying method, 02 Leg-supported method, 03 Suspended installation method
Configuration standard:
① The feed trough is made of 275g hot-dip galvanized sheet CNC bent, the sheet thickness is not less than 1.2mm, 3 meters per piece,
and each meter can provide feed for 12 hens.
② Configure hot-dip galvanized wire feeding grids with a length of 1.5 meters each, a wire diameter of not less than 4.0mm,
a feeding opening size of 46mm*65mm, and a bidirectional reinforcement rib design.
③ The trough joint is made of 275g hot-dip galvanized sheet with a thickness of not less than 2.0mm.
④ Each turn of the material line is equipped with a well-known brand driver and a pad protection plate, which fits tightly with the gear.
Including anti-roosting cover.
⑤ Each material line is equipped with 2 large material boxes with a capacity of not less than 280KG.
The whole material is 275g hot-dip galvanized sheet. The box thickness is not less than 1.2mm, the leg thickness is not less than 2.0mm,
and the legs are adjustable in height.
⑥ Each circulating material line is equipped with 4 angle turners, the inner wheel is high-frequency quenched and designed as double bearings,
with strong tensile resistance and wear resistance.
⑦ The distribution box uses famous brand electrical components and can control the operation of each material line individually.
★ The corner wheel is made of special high-strength alloy steel with high hardness, wear resistance and long service life.
★ The axle is a high-strength maintenance-free humanized double bearing, simple and convenient.
★ The outer layer of the corner shell is anti-static spray-coated.
★ The corners are equipped with limited grid end covers.
★ The runner is made of 45# cast steel, with quenching hardness of HRC50-52 and excellent wear resistance.
★ The shaft design is compact and can prevent feed from entering the bearing.
1. Main material line system
It consists of a drive device, a material tower, a material delivery pipe, an auger and a material level sensor.
Its main function is to deliver the material in the material tower to the hopper of the feeding line,
and the material level sensor automatically controls the motor's delivery start and stop.
To achieve the purpose of automatic feeding.
Material tower main material line system parameters
1. Drive device
Power: 0.75kw/1.1kw/1.5kw, Voltage: 220V/380v, Protection grade IP55, Frequency: 50Hz
2. Feeding system
Material pipe diameter: Ф75mm*thickness 3.75mm, material: PVC, auger: spiral spring made in South Africa, feeding capacity: 3000kg/h,
maximum conveying length: 120 meters.
2. Auxiliary material line system
It consists of a hopper, a feed pipe, an auger, a feed tray, a suspension lifting device, a motor and a material level sensor.
The main function is to transport the material in the hopper to each feed tray to ensure the poultry's consumption and the material level sensor
automatically controls the motor's conveying start and stop to achieve the purpose of automatic feeding.
The hopper capacity is 50KG/120kg, the thickness is 1.2mm aluminum-magnesium-zinc plated material, V-shaped concentric hopper, 3500 pound winch.
3. Feeding system
Material pipe，3 holes/3 meters, 4 holes/4 meters Material: hot-dip galvanized steel pipe, galvanizing amount: 275/m3，Wall thickness: 1.2mm，
Coil spring auger: imported from South Africa
diameter，Middle 75mm，Shipping Capacity，450kg/h, driving motor power: 0.75kw/1.1kw/1.5kw, voltage: 220v/380v, protection grade IP55, frequency: 50HZ.
The automatic egg-laying box is a modern device that automatically collects and cleans eggs, especially for the "two highs and one low" breeding mode.
The clean eggs in the chicken house are transported to the egg-collecting platform smoothly and safely through the conveyor belt.
It avoids the human fatigue caused by traditional nesting and manual egg collection methods, improves production efficiency, reduces egg breakage rate,
reduces eggs outside the nest, and provides clean, high-quality eggs.
Humanized design provides a quiet and comfortable egg-laying space for egg breeders, broiler breeders and laying hens.
Product Attributes
★ The egg collection system consists of an egg collection box, a variable speed egg collection platform, a front egg track, an egg collection box,
an integrated control system and a gentle chicken driving system. The box body is made of 275g hot-dip galvanized sheet,
hot-dip galvanized bottom net and straw mat.
Features
★ Provide a safe and comfortable egg-laying space for laying hens and breeder hens;
★ There is enough nesting space, and each set of egg-laying boxes can accommodate 50-70 sets of breeder hens;
★ The fertilization rate is 98%. The bottom of the nest is soft and comfortable, and the permeable grass mat avoids the accumulation of feces and is easy to clean;
★ The side baffles are breathable and the egg-laying environment is quiet and comfortable;
★ Ensure that the eggs produced are clean and undamaged;
★Humanized chicken driving system protects the chickens from irritation and keeps the nests clean;
★The special conveyor belt structure ensures that the eggs are transported to the egg collection platform cleanly and smoothly;
★ Easy to operate, sturdy and durable;
★The main structure of the egg-laying box is stable and firm;
★The operation of the electric control equipment is simple and can be learned immediately;
